Lesson 9 of 18 · 6 min
Pro EQ, compressors and Radio Ready
See your sound, find the harsh spot, and get loud the right way.
- Put an EQ on a track (Inserts › EQ). The display shows your sound as a moving gold spectrum and the exact curve the EQ makes. Drag a point to boost or cut; scroll on it to make it wider or narrower; double-click to reset it.
- Solo band lets you hear only the part you are working on. Find the harsh spot listens to the track and dips the harshest frequency between 2 and 9 kHz. Before / After flips the EQ off and on so you can compare.
- The red CLIP light means the sound after the EQ is too hot: turn a boost or the track down.
- Compressors show a pump meter (how much they turn the sound down, moment to moment) and their real curve. Reverbs show the tail you are adding.
- Mix › Radio Ready master chain: pick Spotify/YouTube (−14), Apple Music (−16) or Radio/club (−9). It sends every track through glue compression, a tight low end, top-end shine, a little tape warmth and a true-peak limiter, measures your mix and sets the loudness for you.
- Mix › Loudness targets shows where your song sits against each service and whether they will turn it down.
- For vocals, load Chain › Radio vocal chain: clean-up EQ, de-esser, warm compression, a second compressor and air.
Tips
- These are accurate, professional processors, but they are not a mastering engineer's room. For a big release, a human mastering engineer is still worth it.
- Streaming services turn loud songs down to their level, so going far past −14 only costs you punch.